Boating Without Limits
Aqua Watermakers are designed and built for the demands of extended off-shore cruising. Choose your route with the freedom of knowing you will always have fresh, clean & safe drinking water available with the press of a button. No more ques for water and enjoy staying longer in places with limited access to fresh water.
Most watermakers fall into one of two categories; a) Manual or very ‘hands on’ systems that are straightforward but require input from the operator and b) Sophisticated electronic systems with touch screens and expensive components. Our watermakers offer the best of both worlds. Our ECU based design means we can automate the process for you while offering a system made of affordably repairable/replaceable components and a straightforward design.
Our watermakers are proudly hand built and assembled in New Zealand using higher quality components than other options on the market.
We have three AC powered models available right now – AC100/200/260
Specifications
Reverse Osmosis performance varies with the feed water temperature & salinity. The rated performance is tested at 26C/80F water temperature & 33g NaCI/ltr.
*Rated performance*
| MODEL | PRODUCTION / LITRES PER HOUR |
|---|---|
| AC 100 | 100 |
| AC 200 | 200 |
| AC 260 | 260 |
RO Membrane Type: Standard size high rejection TFC Polyamide, thin film composite, spiral wound, single pass reverse osmosis element.
Product Water Quality: Minimum 500 ppm TDS
Feed Water Salinity Range: Up to 50,000 ppm TDS
Chlorine Tolerance: 1000 ppm hours @ 0.1 PPM
Feed Water Pressure: 3 PSI to 60 PSI
Operating Pressure : 800 to 900 PSI
Feed Water Temperature Range: min. 33F /0.5C, max 113F/45C
Electrical Power Requirements
| MODEL | RUNNING AMPS @230V/50HZ |
|---|---|
| AC 100 | 12 |
| AC 200 | 12 |
| AC 260 | 12 |